Growing Your Auto Detailing Business With a Thermax CP3, CP5 or DV12

The auto detailing business is a phenomenal growth industry that thrives on repeat business and referrals. To assure you gain repeat business and referrals you need to do the best job possible. Dirt, grime and smells all need to be removed with perfection. A powerful industrial steam cleaner can truly assist in assuring that you produce the best possible detailing experience possible. Steamers have many advantages compared to traditional extractors by allowing the detailer to sanitize more efficiently and reach areas that the traditional method can’t. There are many manufacturers beginning to produce specialized auto steamers for detailers, though one of the most experienced is Thermax.

Thermax has primarily three industrial steam cleaning machines. The Thermax CP3, CP5 and CP12 (also called the DV12) are the three main steamers. Each of these machines has kits available for either contractors to use for homes and offices or an auto detailing kit. The Thermax steamers perform hygienic cleaning by reaching heating temperature over 135 degrees. These high temperatures allow for greater assistance in properly disinfecting, removing odors and in loosening built on grime. The CP5 and DV12 units actually reach temperature over 175 degrees. The pressure in each of these machines is also extremely powerful.

The CP3 has a PSI of 60, while the other two models have pressure of 100 PSI. The high PSI pressure will allow enough power of steam to reach into those tougher area’s like between seats, dashboards, cup holders and all crevices to remove any dirt or spills. The Thermax models allow for the addition of solution for those looking for the added benefit of fresher and brighter feel. Each of the units has a two stage vacuum motor for rapid water recovery and quicker drying times. The CP3 unit has a 3 gallon recovery tank, CP5 5 gallon tank and the DV12 has a 12 gallon recovery tank. Lastly each units attachments have long hosing to allow for less movement of the unit.

Thermax did not hold back when designing each of these units. The quality and design of these commercial steamers are worth the investment as the performance is superior. Thermax feels so confident in the quality that they offer a 3 year warranty on each machine. Auto detailing is a competitive business that requires superior performance for longevity in the crowded market. The Thermax steamers are quality machines that an auto detailer or carpet cleaner can feel confident using while differentiating themselves with the future of cleaning.

The Science of Car Cleaning Products

In most cases you can clean and protect your vehicle with just a few basic car cleaning products. In this article you will learn some of the science behind auto detailing supplies so you can clean your car the right way.

Soil can be organic, non-organic or petroleum. That’s important to know. If you can identify the soil you’re dealing with you can use the right cleaner. When you use the correct cleaner most stains come out with ease.

Take organic soil as an example. Organic basically means that it contains carbon. Stains in this group include proteins, animal fat, body oil, mold, yeast, insects, bacteria and excrement. The classic example is the batch of hot French fries your three year old spilled on the back seat. That’s an organic soil stain.

Non-organic soil does not have carbon molecules. Most often we find these stains on the exterior the vehicle. A good example that frustrates most of us from time-to-time are water spots from minerals. Acid rain spots fall into this category, as well.

Finally we get to petroleum. These soils come from substances that do not contain or cannot be mixed with water. Motor oil, grease and road tar are the most common petroleum soils. Note that chewing gum is also a petroleum soil.

Now that you are aware of the three types of stains we can begin to discuss cleaners. Let me tell you, there are a lot of them. Unfortunately, no one has invented a true all-purpose automotive cleaner. Due to the many different surfaces and soils, automotive cleaners are complex mixtures of chemicals blended for a particular type of surface or soil. The most common chemicals used include surfactants, solvents, wetting agents, saponifiers and chelators.

Soaps and detergents are made using a surfactant. It’s an agent that has two compounds. One molecule is attracted to the soil itself, while the other loves water. The compound that’s attracted to water is a hydrophile. Its job is to surround the soil. The soil attracting agent is a hydrophobe. Its purpose is to break up the soil so the hydrophile can get to it and make it float away.

All cleaners needs a solvent of one sort or another to dissolve dirt and carry it away. Some solvents, including mineral spirits, work on petroleum soils and may be necessary on surfaces damaged by water. Did you know that the most common solvent used in cleaners is water?

Speaking of water, any solution that has a water base or mixes with water has a pH level. The term pH is merely a measurement of the relationship between hydrogen ions and hydroxyl ions. When you have more hydrogen ions than hydroxyl ions, that’s an acid. Likewise, if you have more hydroxyl ions than hydrogen ions it’s an alkali. Knowing this is important because any cleaner that falls at either end of the pH scale can cause serious damage.

The pH scale runs from 0 to 14. The lower half of the scale represents acids and the upper half represents alkalis. As you might have guessed, water is neutral and has a pH of 7.0.

If you know the pH of a cleaner you will know where you can use it. A carpet shampoo should have a pH around 8 or 9, whereas an all-purpose wheel cleaner should be between 12 and 14. Try using a cleaner made for wheels on your car’s fabric and carpet will make a pretty big mess.

Now that you know the basics you can better understand why there are so many car cleaning products and auto detailing supplies. Your vehicle has many different surfaces and they have different cleaning requirements. You can avoid using harsh cleaners by using basic protection. Wax the exterior several times each year and protect the interior with appropriate products. For the ultimate in protection, use an outdoor car cover or a waterproof car cover when you park outside.

Can My Car Floor Mats Cause Me to Crash?

With the recent recalls, there has been a lot of discussion regarding floor mats. These inconspicuous accessories to every automobile on the planet have rarely been the focus of intense discussion. Indeed, most of the time the only way a floor mat is mentioned is if it is dirty or particularly funny/interesting.

But, since the slew of accidents and even fatalities, the spotlight has been rightfully shined on these potential hazards.

How is a floor mat dangerous?

The danger of floor mats don’t come from anything mechanical, but more in their ability to stay in place. If a mat were to slide forward when a driver is actively engaged in using the accelerator and brake pedals, it could cause an unwanted increase or decrease in speed.

Some instances of floor mat disruption involve the brakes. If a mat bunches up underneath a brake it could hamper the drivers ability to depress the pedal. When braking, a person only has a small window to react properly and this kind of distraction has been known to delay reaction long enough to cause accidents.

The other major way mats can be dangerous is causing a sticking effect of the accelerator. Sometimes the mat gets flipped on top of the pedal, other times its gripping nature causes the pedal to stay depressed. In both scenarios the driver does not get the reduction in acceleration when they release the pedal, which can cause distraction and problems when trying to brake in time.

What kind of floor mats are dangerous?

The most dangerous floor mats are after market models that do not properly fit the mold of your vehicle. It is the driver’s responsibility when purchasing an after market mat to make sure it fits, and ideally, works well with any hooks or stabilizing elements your car features.

Also dangerous are mats that are explicitly recalled from companies. These are mats that do not work well with safety measures put in place, or simply do not have enough safety measures to begin with.

Are there any solutions to mat problems?

If you are worried about mat safety, the first and best thing you can do is simply remove the mat. Your car floor may get dirty, but it is much better than suffering a crash.

Continue to err on the side of safety until you can find a model that secures tightly to your vehicle, and ideally has retaining hooks to keep it in place.

Selecting the Right Truck Bed Liner For Your Pickup

Bed Liner comes in different shapes and sizes. It is made to protect the flooring of the truck bed which is quite similar to what floor mats and liners do for other vehicles. This automotive accessory is essential to use especially if you often put load on the bed. The bed’s floor can be ruined by dirt, grime and liquid so it would need an extra protection to retain its good condition. It can also prevent your gears and loads from shifting or slipping when you hit the brakes.

Before you buy a bed liner for your truck, there are some differences you’ll need to take note first. Would you want a BedTred or BedRug? They have the similar purpose of protecting the truck bed, but let us know the differences between the two.

Which bed liner works best for your truck?

BedRug and BedTred are actually made by the same brand called BedRug, which is the company behind the popular truck bed liners and mats.

– BedTred Pro Truck Bed Liner

BedTred is molded from quarter-inch thick thermoplastic olefin composite which provides a spray-in liner look with a drop-in mat convenience. It is also bonded with water-resistant closed-cell foam to prevent liquid and other substances to leak onto bed flooring.

This product is great if you’re loading heavy loads which can cause dents and gashes in your truck bed. It provides a heavy-duty protection to the bed but it’s not recommended if you’re loading up delicate cargo such as furniture, electronics, sports equipment or even pets. It has no skid resistance so your cargo will crash toward the tailgate or slide forward toward the cab if you hit the brakes. Kids are also not recommended to sleep on this liner because it might scrape their knees because of the hard abrasive surface. It covers the floor, sides, wheel wells and tailgate of your truck. It is custom made for specific trucks to ensure it will fit directly to the bed.

– BedRug Bed Mat

This one is made from thick, carpet-like foam unlike the all-plastic materials from the BedTred. It is great to use if you need an extra protection on the bed but with a luxurious feel. It is created with non-abrasive to prevent any scratch on the finish of your truck.

It provides an impact absorbing barrier to grip and hold the cargo in place during transport. It has a foam floor and plastic fiber surface that works as an anti-slip material. It cushions your valuable load and has knee-friendly surface that is smooth and comfortable compared to BedTred. It is also made for specific vehicle to guarantee that it will fit properly onto the bed and can be installed without drilling holes.

BedRug and Bedtred have its differences but have the same purpose to provide protection to the truck bed. Both products are constructed using superior materials with superb craftsmanship to ensure its durability and quality. Select the best liner that will suit your preference and needs. The bed liners are custom-formed to the truck bed to guarantee a flawless fit and hassle-free installation.